How to Fix Bent CPU Pins

How to Fix Bent CPU Pins
How to Fix Bent CPU Pins

Building your computer may be one of the most important decisions you’ll make in life. But it’s also an intensely personal and complicated process. 

One of those dangers is handling new processors with care; there are so many delicate pins on their undersides that even a mild slip could cause permanent damage by bending them!

Luckily though-most people who bend some pins can fix this without any problems at all. By just turning them back into shape before anyone else notices what happened (and they won’t).

The key to getting your processor working again is prevention. Always make sure you have a proper cooling system and fan for the best possible performance from it.

As well as keep up on general maintenance such as cleaning out dust where they accumulate, so nothing blocks their airflow with too much force! If something does happen, though (like bent pins), don’t panic; 

Our guide outlines all steps necessary to get things back on track quickly. It is done without risking any warranty status or else having repairs take forever due to time-consuming delays. It involved when returning products at customer request over RMA them instead of fixing themselves first.

May You Like: How to Fix CPU Over Temperature Error

Procedure to Fix Bent CPU Pins

  • Grabbing the CPU by its edges and peering down the straight rows of pins is an easy way to assess the damage.
  • The trapezoidal blade fits perfectly between rows—the thickness matches what must exist gap.
  • To straighten out a crooked pin, tilt the blade. Pitching it to one side will make all of the nails in that row stand at different heights 
  • Leaving the pins on opposite sides lined up perfectly with each other!
  • Using sharp-angled tweezers, gently coax any severely bent pins up to an angle, where your utility blade can access them as you work on each row of wires in turn; 
  • Repeat steps 4-5 once more just for good measure before moving on to the following wire groupings above them.

May You Like: How To Tell If The CPU Is Dead

Different Methods to Fix Bent CPU Pins

Here are few methods to fix bent CPU pins. scroll down and read all methods.

1. Straightening Pins

To bend the pins of your CPU, you will need something more complex than a credit card or gift card.

Try using an outdated Visa-like plastic with no bends in it, and then stand on edge gently. Run through row should slide between each pin without any resistance at all!

2. Realigning Pins with a Mechanical Pencil

You’ll want to use a mechanical pencil from your desk if there are a few specific bent pins. It works with an opening around .5 or 1 millimeter wide, depending on if you have small hands and thick fingers! 

Carefully maneuvering this tip over each CPU pin ensures a straight return into place while tracking; how much space taken at different angles helps provide enough guidance during bending efforts- so no need for guesswork here.

3. Leverage with a Sewing Needle

A needle is the best tool for unbending pins that are bend in a processor. The thinness of needles allows them to fit between two points, making them more comfortable than other tools.

It can work with smaller diameters where others wouldn’t be able because they’re too thick or sharp sounding when tapping against metal surfaces. 

Take care not scratch anythin gser Ielmoe! It will leverage–you guessed correctly!–the straightened position back again if done incorrectly.

May You Like: How to Fix CPU Bottleneck


One of the most delicate sections of a computer is the CPU pins. They can only bend so many times before they break, and sometimes even an accidental bump is enough to cause damage!

Now that you know how to fix bent CPU pins, we hope you’ll never have to deal with this problem again.

However, if your computer is still giving you trouble after applying these tips and tricks for fixing a damaged processor pin or socket, consider seeking help from one of the experts on our team at IT Services Company. 

I am a computer science graduate, and I love to play games. As an offline and online marketplace seller of computer hardware, I have the opportunity to help people make informed decisions about what they can use for their needs.