Three major motherboard makers, ASUS, ASRock, and MSI, have confirmed overclocking capability for Intel’s non-K CPUs on the cheap H series boards in an unprecedented step.
Although this isn’t technically overclocking, it has a comparable impact. The base frequency is increased rather than the boost clock. It is accomplished by raising the TDP or PL1 value.
This function allows your CPU to run at or near boost frequency for extended periods. Intel CPUs run at a higher frequency for a certain period before returning to stock frequencies.
The Motherboard manufacturers have previously circumvented this limitation by adding strong VRMs on their higher-end boards, allowing the CPU to run at boost clock for far longer.
How to Overclock Intel Non K CPU | Step By Step Guide
Over some time ago, Intel said no more overclocking Intel sky lake. What a letdown, right, especially who purchase any of these CPUs right here until we fix this issue via a microcode update now included in every BIOS of every motherboard that you could buy on different sites like amazon. Now we study the proper way to overclock Intel non-k CPU.
For example, you went out and purchased a z170 motherboard; you would likely have a motherboard that included a BIOS that featured this Intel microcode update, but what if we were able to downgrade our bios to the older skylake overclockable version.
There are plenty of sites online that feature these old BIOS update that hasn’t been removed. I used Pentium g 4400 as my guinea pig. Stay tuned.
The first thing I had to do was hop online and find the old BIOS update the correspondent to my particular motherboard.
I found it on the website I clicked, and I went ahead and gave it a download when the download was finished. I Pugged in my USB thumb drive and then extracted the BIOS updated into its folder.
It should be as simple as I then restarted my computer and promoted it into its BIOS via the delete button from the home screen.
I clicked f8, which stands for cue flash, and then I found my Bios inside my thumb drive folder. I installed Everything correctly, and I prompted it back to my home screen. Everything looked pretty good up to this point.
Now what I had to restart my computer again and this time go into my newly downgraded bios to see if I could face clock overclock?
Yes, I could get within the CPU frequency from 102, basically whatever I wanted. So I change it to where my actual CPU frequency was just above four gigahertz.
Keep in mind that raising the base clock frequency will increase your frequency. So I don’t recommend turning on XMP profile, especially if you have RAM that’s considerably fast, around 3000 megahertz or higher.
I also decided to manually raise my voltage from its standard 1.0 8 volts, which I think would be under voltage or CPU at an f nor more multiple frequencies to 1.2.
It is a safe value for now. I restarted the computer after savings within the bios, and boom, the overclock stuck. I confirmed it via hardware monitor and the bios itself after another simple restart.
May You Like: How To Overclock CPU
At the same time, my geekbench score was not considerably higher, my sentiment score. It would contribute to extra fps in almost any game you decide to play, all other things equal.
It means if you choose to purchase a z170 motherboard right now and a non-k Intel skylake CPU. You can still actually overclock as long as you are okay with the downgrading of BIOS.
If you’re comfortable with that, things are looking pretty good things could go south. However, if Intel decides to push this micro updated via a window ten update, you would almost assuredly experience a blue screen of death.
If you were base clock overclocking a non-k CPU with that microcode embedded into window 10.
So during the overclock Intel non-k CPU to prevent this, I recommended googling how to disable window ten automatic updates and being familiar with how to uninstall security updates that windows ten may have already installed in your system in the background.
Although, for now, I do recommend still purchasing non-k CPUs with the intent of overclocking them, it looks pretty safe as long as you are comfortable with downgrading any BIOS for any motherboard that you might be purchasing shortly.
ASRock has discovered a technique to overclock Intel’s non-K CPUs. If you wish to overclock, get an unlocked K-series CPU and change the multiplier in the BIOS to increase the clock speed.
A non-K series CPU with a non-adjustable (locked) multiplier, on the other hand, will save you some money.
The only option to manually overclock is to change the base clock, which might be difficult. You see, there’s no way to unlock an Intel microprocessor by hacking it.
Unlocking a chip is a physical procedure that takes place itself at the manufacturing. So there’s no code to try to crack on a chip that isn’t in the K series.